If you wish to present a spectacular ring to your women on the occasion of engagement to her, then we suggest that you opt for solitaire diamond engagement ring. There is nothing comparable to this ring that has a single larger diamond on the top and rest of the ring body is simple but elegant in look. So, the solitaire is a mix of glamor and simplicity. But you should take its various aspects into account before settling for it

These rings display a sole larger diamond on the ring top with typical prong setting. Four to six prongs are erected around the gem in a metal basket in order to provide security to it. The diamond is lifted above the metal surface and presents a spectacular show on the ring. The ring body is usually very simple with exception of some engravings on the metal. But such simplicity of the metal provides adequate backdrop for the diamond so that the gem can glitter with more fire and brilliance.

While choosing from the solitaire diamond engagement rings, you should be prepared to spend more. This is because these rings have a single diamond that is of greater carat weight. As the carat weight increases the cost of the gem goes higher. As the diamond is usually of greater carat weight and is costly for many people. Go through the tips for all the tips for the cost reduction of gem.

To reduce the cost to some extent, compare its prices on Internet and in several physical stores. Make sure that the diamond is tightly set on the ring metal with adequate prongs around it. A working woman may loose the diamond if it is not tightly secured on the ring metal. Settle for the diamond ring after comparing several designs and the prices as well.

One of the best ways to have one of the solitaire diamond engagement rings of your choice within your spending power is to design it. Designing of own engagement ring also gives you a personal ring as its design is unique and not available elsewhere. To prune the cost, all you have to ensure is an affordable diamond, metal and the jeweler whose fee is not expensive.

Prefer buying the rings from online jewelers for their competitive and affordable prices. Compare as many such jewelers before you buy from them. Solitaire diamond engagement rings are spectacular buy you should buy them only after ensuring her choice of diamond and settings.

Frank Luca is the pioneer author, and likes to share his experience and idea with others on Jewelries.
For more information about jewelries visit – http://www.glimmerrocks.com

Article Source:http://www.articlesbase.com/jewelry-articles/solitaire-diamond-engagement-rings-spectacular-gifts-for-women-1550153.html

We know that gemstone jewelry is colorful, but how to harmony the body and gemstone jewelry?
gemstone jewelry and clothing
Without explanation, the stones perfectly integrated into the whole garment will have a good decorative effect. In fact, the easiest way is to select a gem with the color of the clothes, but it must pay attention, clothing and colors than the light of some or dark stones some, do not let the bright clothes to cover up the stones brilliance.
Black is the best foil for all colored gemstone necklace, whether it is red, blue, yellow or pink, but if less attention to detail is hard to avoid monotony, if coupled with a corresponding other color belts, bags, shoes and other adjustments will be Brisk natural more.
If you want to try some bold and some mix, you can choose complementary colors, such as ruby with green or blue clothes; sapphire and orange, red, yellow shine; yellow in purple, blue backdrop of dazzling dresses; pink dotted yellow gem Green, blue and green clothes and amplified flirtatious. The lines echo the shape of equally important, the overall style or just, or soft must be harmonized.
In addition, there is one thing for the necklace, and pay attention to not let the location of stones at the junction of skin and clothing, if not it in full parade in the skin, they just let it completely outside of the blocks of color in clothing, especially a pair of black, white, gray and other colors plain clothes, if the necklace just in the middle of the neck and collar, the effect will not be good. In addition, if the clothing color and texture is fuller than precious stones, precious stones larger size will only complement each other.
gemstone jewelry and makeup
Make-up colors are cold are warm, jewel tones no exception. For example the yellow gem like citrine necklace, if you are biased golden gem, then the warmer colors, natural makeup line for coffee and other warm; while cool colors of the ordinary yellow, pink fit and purple colors, cool colors such as make-up.
The choice of lipstick is also very important, if clear, bright color gemstones, Pearl jewelry, etc. may wish to choose effects; if full deep jewel colors, and then higher color saturation for lipstick.

More knowledge of jewelry and the trend of fashion jewelry in this winter,please visit aypearl.com , wholesale jewelry online.Please enter your sole coupon code AY9902 when submit order, Then you can enjoy the special discount.

wholesale jewelry
fashion jewelry

Article Source:http://www.articlesbase.com/jewelry-articles/aypearlcom-explain-how-to-harmony-with-the-overall-color-of-gemstone-jewelry-1462975.html

Sapphire, the name has originated from Latin ‘sapphirus’ meaning blue and the Persian “safir’ signifying beloved of Saturn. That is it. Now what you will find, as you continue reading below, wouldn’t resemble the same monotony on this gemstone, which almost 90% of the online material would provide.

Apart from the same matter like blue and other types of colors found in this crystal, there is much more to provide to buyers. This includes information about color zoning, enhancements, or treatments, and imitations.

Pleochroism in corundum family, makes sapphire, a color zone prone stone. Color zone in this stone indicates towards the growth layers of mineral. It actually is in the form of series of concentric hexagons parallel to prismatic crystal faces. Like known, color and clarity of a gemstone, play a vital role in its pricing.

While valuing blue sapphire, a stone with a violet overtone, with no hints of grey or green, is preferred. As above, irregular color coverage, or dispersion is detracting from its value and beauty. A properly faceted stone can solve a stone’s color zoning problem and enhance its color coverage.

In addition, more color coverage ensures high saturation, seen in normal viewing positions. Sapphire gems cut too shallow can decrease color coverage.

As a precaution, sapphire shouldn’t be cut too shallow or deep, for that matter, since excessive deep-cutting is a sacrifice on brilliance.This creates black areas as ‘extinction’.

Whereas a shallow cut could result in appearance of short light paths called as ‘windows’. Therefore, most large sapphires are in oval, emerald or cushion cuts and the smaller ones are able to fancy other kind of shapes too.

There is rarely a sapphire which is flawless. Sapphires are usually found with inclusions. In addition, inclusions and clarity go together. Clarity is basically based on factors such as size, number, contrast, and location.

However, there are cases of sapphires with inclusions, which are relatively highly- valued just like flawless ones. Since sapphire is a hard stone, it does contain preferred directions of parting which shows, that material can be brittle in spite of its hardness.

Many internal conchoidal fractures and or cracks can weaken a stone. Nevertheless, there are very less chances when sapphire as a jewel has failed first, as compared to the metal work, during years of wear and tear.

Going back to clarity, it is decided by referring to its inclusions. Fracture filling is a common industry practice which includes oil, wax, paraffin, and glass and epoxy resin as fillers. After this, color of stone is still not diminished and fractures are non-reflective.

An enhancement like heat-treatment is also widely practiced. A permanent practice, heating facilitates melting of any silk inclusion plus intensified color. Whereas irradiation is a temporary process of intensifying color.

Numerous imitations or doublets are sold to travelers in Far East, since they are difficult to be separated from the natural sapphire gemstones. Even gemological tests, after setting in jewelry fail to catch the culprit.

Presence of misnomers, like ruby as red spinel and red garnet was prevalent during 1800’s. Still today, this malpractice is found to be conducted intentionally.

For example, a cobalt-blue glass is stuck with a crown of garnet, or a low-grade sapphire crown and pavilion are simply glued together with a colored epoxy. This results into a fake yet creation of a blue sapphire with an expensive hue reflection.

Jewelry is not just in writing but a fascination for me. I grew into it since the day I started my research. There is a lot that one needs to know about jewelry simply because they are so valuable that you cannot afford to miss a single bit. My alliance with online gemstone and jewelry selling website enables me to bring you the best of jewelry fashion and jewelry education.

Article Source:http://www.articlesbase.com/jewelry-articles/celestial-blue-sapphire-1455190.html

Some of the real and original diamonds have a history that is not as well-known and clear, and they only add to the romance and mystique surrounding them. But this is not the case in synthetic diamonds. There is something so exciting about the synthetic diamonds. They have well-documented histories and we know where they came from, and who produced them and when.

The motivation to create man-made synthetic diamonds resulted from the desire of scientists and researchers to improve technology at a much lower cost than the expensive mined real diamonds. The synthetic diamonds are a cheaper and more readily available solution when compared to the real diamonds. They are a boon to both the world of gemstones and the world of technology.

Synthetic diamonds look like real diamonds but do not have all the same properties as real diamonds. It is extremely difficult to differentiate the characteristics such as chemical composition, hardness, weight, brilliance, luster and some of the light handling characteristics of real and synthetic diamonds with the naked eye. Synthetic diamonds have some properties such as durability similar to the real or mined diamonds.

In the past cut glass was probably the first material used to simulate a diamond. It is readily available, easy to cut and polish. The synthetic diamond made of cut glass looks good when seen from a distance, and is extremely low cost.

The use of cut glass has widely been replaced by the most popular diamond alternative, cubic zirconium. Cubic zirconium has been the most widely used material for synthetic diamonds since 1976. Its low cost, durability and light handling characteristics have made it extremely attractive in producing low cost jewelry. The light handling characteristics of synthetic diamond made of cubic zirconium is so close to that of a real diamond. The annual global production of cubic zirconium diamond reached 50 million carats by 1980. Cubic zirconium diamonds weigh about 1.7 times more that of real diamonds, and have the hardness rating of 8.5 to 9 which is bit less than the real diamond.

Henri Moissan is the first one to create a man-made diamond using moissanite or silicon carbide in a laboratory in 1892. Moissanite is a naturally occurring mineral that is a little softer than real diamonds but has almost all of the other properties of a mined real diamond. Charles and Colvard introduced gem-quality moissanite jewelry in 1998. Moissanite has almost the same thermal conductivity as a diamond. You need a highly specialized equipment to differentiate a moissanite diamond and a real diamond. JamesAllen.com states that synthetic moissanite diamonds made from silicon carbide gained widespread use beginning in 1999. These fakes are so good that standard thermal conduction testers used by jewelers cannot detect them. They also sell for nearly as much as the real thing. There is a key to identify a moissanite synthetic diamond – You can see double facets or a doubled table reflection, when you look this synthetic diamond through a 10x loupe. The synthetic moissanite diamonds have a greater density, weighing more than a comparable diamond.

The only way you can be sure to differentiate between a genuine diamond and a high quality synthetic diamond on the market is based on the citification and some simple and more conclusive tests.

Nisha is a Copywriter of precious stone. She written many articles in various topics.For more information visit:koh-i-noor diamond. contact she at <a rel="nofollow" target="_blank" href="mailto: malar.article@gmail.com“>malar.article@gmail.com

Article Source:http://www.articlesbase.com/jewelry-articles/history-about-synthetic-diamonds-1446545.html

Cubic zirconia is a gemstone that looks like diamonds and are affordable as well as easily available. They are used extensively in earrings, bracelets, rings etc. The popularity yardstick is high for these stones. The amalgamation of Zirconium oxide and yttrium oxide are utilized to grow zirconia crystals.

These crystals are devoid of flaws and have a crystalline exterior. They are bereft of color but at times come in hues of soft yellow or color of your choice. It is more radiant than crystal and in terms of durability they outlive many gems as it is tougher than them. It is difficult for an eye that is not trained in this matter to demarcate between a cubic zirconia and diamonds of superior quality. It can be worn as an alternative to exclusive diamond jewelry. It will have the brilliance and exquisite designs of real diamonds and will be cheap at the same time. If you nurture the idea of displaying proudly your diamond ring, then you can do the same with a cubic zirconic ring and give shape to your wish.

The true replica of the expensive diamond rings or platinum rings are the synthetic diamond or platinum rings. They are attractive and appeal to all due to their exclusive designs and cost effectiveness. Commitment can be shown by these zirconia rings to your partner when you have to keep the fixed budget in mind. You have the option of selecting a ring from amongst a variety of colors. The choice of colors can depend on your partner’s personality. It is an exclusive gift which one would cherish for life. A thing to be noticed is that cubic zirconias do not aggravate war situations the way diamonds do.

When buying zirconia many of us make the mistake that all are equally created. There are different grades just like diamonds. In fact high quality of these stones look better than diamonds whereas low quality ones don’t have that sparkle in them. Also these synthetic diamonds, as they are also popularly called, can be set in 14, 16 and 18k gold. There are many web stores where you can buy these stones and most of them have beautiful earrings, pendants, bracelets displayed on their pages. Many offer free shipping and in less than three days it is possible to get your ring or bracelet delivered to your doorstep. Customized options are also available in most of these stores.

For good deals and discounts on cubic zirconia visit http://www.birkatelyon.com. You will have many options to choose from and you will be surprised with the prices they offer.

Article Source:http://www.articlesbase.com/jewelry-articles/cubic-zirconia-the-best-alternative-to-real-diamond-jewelry-1443646.html